The professional’s ‘waterproofing system of choice’ this internally applied and fully maintainable basement waterproofing system is ideal for new-build or refurbished basements. Based upon our range of cavity drain membranes, drainage conduits, and sophisticated pumping and control systems this provides Type C protection as defined by BS 8102:2009, and also holds BBA certification (94/3010).
3mm Cavity Drain Membrane for Basements
3mm Cavity Drain Membrane for Basements – Suitable for use internally below the ground to retaining walls, vaulted soffits and floors. BBA Certified.
3mm Meshed Cavity Drain Membrane For Basements
3mm Meshed Cavity Drain Membrane for Below Ground – the meshed surface provides an excellent ’key’ for lime mortars, renders, plasters or dabbed plasterboard. BBA Certified.
8mm Cavity Drain Membrane For Basements
8mm Cavity Drain Membrane for Basements – Newton 508 is the most commonly used membrane within our Newton System 500 waterproofing system. BBA Certified.
8mm Meshed Cavity Drain Membrane For Basement Walls
8mm Meshed Cavity Drain Membrane for Basements – Suitable for use internally below the ground to retaining walls and vaulted soffits. BBA Certified.
20mm Cavity Drain Membrane For Basement Floors
20mm Cavity Drain Membrane for Basement Floors – With its 20mm stud profile, Newton 520 is generally specified where it is anticipated that there may be a risk of severe water penetration.
Drainage System For Use With Newton System 500
Drainage System For Use With Newton System 500 – A range of products that collectively receive water ingressing at weaknesses within the structure and then discharge the collected water to a Newton Sump System or safe drainage.
Drainage Conduit – Above slab drainage conduit that is designed to capture water that is entering properties via the wall/floor junction for removal to an appropriate drainage medium.
Ancillary Products For Use With Newton System 500
Ancillary Products for Use with Newton System 500 – A selection of specialist ancillary products that are critically important for the correct installation of Newton System 500 cavity drain membranes.
Closed-Cell Slotted Insulation Board
Newton Fibran XPS 500-C is a 50mm deep, closed-cell thermal insulation board made from rigid extruded polystyrene foam (XPS).
Pumping System For Use With Newton System 500
The Titan-Pro packaged sump system is designed specifically to be used with Newton System 500.