Waterproofing Systems / Pumps, Pumping Systems & Anciliaries

Pumping Systems & Anciliaries from Newton

Extensive range of submersible pumps and pumping ancillaries for controlling clean ground water, grey water, effluent or sewage in basements, including backwater systems, speak to our team about our full range of products.

  • Newton CP250, CP400 & CP750

    A Range Of High Quality Clean Water Pumps

    Ideally suited for the removal of ground water from basements and cellars.

  • Newton NP400 P2 & P3

    Clean Water Pump

    A high head and high to medium performance pump. The NP400 is available as an automatic pump (as shown), or as a manual pump for use with our pump control systems.

  • Newton NP400 PP

    Puddle Pump

    The Newton NP400 PP is a 400 watt puddle pump specifically designed for pumping water down to extremely low levels of just 1mm in depth.

  • Newton NP400 LLPS SP1

    Low Level Pumping System

    A small control panel and low level switching module added to the Newton NP400PP puddle pump that will give accurate and safe switching of water levels of just 10mm.

  • Newton NP750 P5 & P6

    High Performance Clean Water Pump

    The NP750 is available as an automatic pump or as a manual pump for use with our pump control systems. The NP750 is available as pump only, or as a key component in our Newton Titan-Pro packaged pump systems.

  • Newton NP400W P4

    Medium Head And Medium Performance Pump

    A medium head and medium performance pump specifically placed within the Newton pumping range for when dishwasher, washing machine or bath/shower waste is to be removed from the sump.

  • Newton NP750W

    High head and High performance effluent pump

    A high head and high performance effluent pump for the removal of waste water from the Newton Titan-Pro sump chambers or formed concrete chambers.

  • Newton SP750 Cutter

    Sewage Pump

    High quality sewage pump, incorporating a tungsten carbide tipped cutting impeller that rotates against a serrated suction cover in order to cut solid waste before pumping, resulting in a much lower risk of blockage than similar sized vortex impeller pumps.

  • Newton Titan-Pro

    Pumping System For Use With Newton System 500

    The Titan-Pro White packaged sump system is designed specifically to be used with Newton System 500.

  • Newton Titan-2

    Basic Pumping System

    A basic pumping system incorporating an octagonal sump chamber, class leading pumps, lock & seal lid and frame, high water level alarm, internal pipe-work, one way valves and quick release shut-off valve for quick release of the pumps for servicing.

  • Newton Trojan

    Sewage Pumping System

    A specialist pumping system suitable for a variety of pumping tasks, ranging from the lifting of sewage from basements to a higher level sewage system, to the removal of groundwater and surface drainage. The sump is available in depths of 1m and 1.5m.

  • Victron Inverters

    Provides Pumping During Power Interruption

    The Victron range of pure sine wave Inverters/Chargers provide advanced solutions to ensure that Newton pumping systems continue pumping during power interruption, by inverting 12V DC power from a battery (or multiple batteries) to clean and efficient 230V power.

  • Newton Pump Controller CP9

    Pump Controller For Newton NP And SP Pumps

    The Newton Pump Controller is designed to be used with matched pairs of Newton NP400, NP400W, NP750 or SP750C Cutter manual pumps and provides a sophisticated, yet simple to install, twin pump control system which offers some of the features of the Newton Control Panel-Pro, but at a much lower cost.

  • Newton Control Panel-Pro

    Class Leading Pump Control Panel

    The Newton Control Panel-Pro is a class-leading pump control panel with many unique features, which has been designed by Newton Waterproofing Systems to provide the ultimate in pump operation and diagnostics.

  • Newton High Level Water Alarm PA50

    Designed To Detect High Water Levels Within Pump Chambers

    The Newton High Level Water Alarm – PA50 has been designed to detect high water levels within pump sump chambers and is included within the Newton Titan-Pro and Newton Titan pumping systems. The alarm is battery operated and uses a standard 9V PP3 battery.

  • Newton Dialer PA5

    Provides Enhanced Alarm Capability

    The Newton Dialer provides enhanced alarm capability to our PA50/CP9/CP2 controllers as part of a Newton Pumping System.