Newton 322-SP Injection Resin
A two-part, low viscosity injection resin with excellent adhesion, that can be used either to seal fine cracks and joints in reinforced concrete structures, or injected into an injection hose system to seal construction joints and provide a maintainable Type B waterproofing system.
Packaging (Part A): 12kg container
Packaging (Part B): 13.2kg container
Choosing The Right Injection Resin
Newton's resin injection comparison matrix provides an overview of all of the resins within the Newton ReSeal System for sealing and preventing water leaks.
Related Case Studies
Newton 322-SP is two-part injection resin that is especially suitable for sealing extremely fine cracks and joints thanks to its low viscosity. It is also ideal for injecting into the Newton 302 Injection Hose for the sealing of construction joints within concrete structures, providing a watertight 'Type B' structure.
The cured resin has excellent adhesion to concrete and metal, will not dry out or shrink, will not swell when in contact with water, and is non-corrosive to metal. Its low viscosity also means Newton 322-SP can be used in conjunction with the high-foaming Newton 320-FP, moving around the cured foam that has been used as a Stage 1 product to stem the flow of water, and fully sealing the fine cracks, joints and voids in order to complete the sealing system.
Penetrates deep into fine cracks
Slow reaction times and long working life
Exhibits high levels of chemical resistance
Very good adhesion to concrete and steel
Suitable for use within injection hose systems such as Newton 302 Injection Hose
Typical Waterproofing Applications
Deep sealing of wet or dry joints and fine cracks
Stage 2 sealing to complete the water sealing operation after Stage 1 has been carried out by products such as Newton 320-FP
Post-construction sealing of construction joints within reinforced concrete structures via the Newton 302 Injection Hose system
Newton ReSeal System
The Newton ReSeal System consists of a range of Newton's advanced concrete repair mortars and injection resins to seal structural and non-structural cracks and defects, whether they are dry or leaking large volumes of water.
The products in the Newton ReSeal System can be used to repair a number of defects, including spalled and broken concrete to walls and pillars, road repairs, and cracks and honeycombing to concrete basement walls, soffits and floors.