Waterproofing Systems / System 500 / Newton Basedrain

              

Newton Basedrain

Drainage System For Use With Newton System 500

Newton Basedrain is the drainage system used most commonly within the Newton System 500 waterproofing system. It compromises a range of products that collectively receive water ingressing at weaknesses within the structure and then discharge the collected water to a Newton Sump System or safe drainage


  • Key Benefits

    The drainage system compromises a range of products that collectively receive water ingressing at weaknesses within the structure and then discharge the collected water to a Newton Sump System or safe drainage (drainage that is below the level of the basement floor that cannot back-up or block).

    The 18mm holes drilled in both sides of the profile, as well as to the top surface, allows water from beneath the Newton Fibran XPS 500-C and within the spacer zone to enter the drainage channels more easily.

    Typical Applications

    Basedrain – Drainage conduit for the perimeter of the area to be waterproofed. Is situated at the base of the wall membrane

    Floordrain – Drainage Conduit for collection of water at construction joint to the floor and to replace Basedrain at door thresholds. Floordrain is also used to connect the perimeter Basedrain to the sump.

    Basedrain Corner – Formed 90 degree corner.

    Basedrain T Piece – Formed T for a 90 degree connection to Floordrain from Basedrain and for draining through engineering brick as an alternative to open perpendicular joints.

    Jetting & Access Point – for inspection and maintenance access to the drainage system.

    Product Overview

    • A. Newton Basedrain (2m lengths) – Product Code D1

      B. Newton Floordrain (2m lengths) – Product Code D3

      C. Newton Basedrain Corner – Product Code D6

      D. Newton Basedrain T Piece – Product Code D7

      E. Newton Basedrain Adaptor – Product Code D24

      F. 63mm O/D Pipe to Newton Titan-Pro Sump, Titan Sump or safe drainage – See price list for pipe codes

      G. Newton Basedrain Inspection Port (not shown) – Product Code D26

  • Speak to the Experts

    For further information about structural waterproofing speak to one of our technical experts:

    Call us:  01732 360 095
    Email us: tech@newtonwaterproofing.co.uk

    ADD TO ENQUIRY


    PDF Downloads

    Data Sheet  


    BIM Object

    View product on NBS National BIM Library

     


“I use Newton Waterproofing Systems because of the friendly and efficient service that we get - nothing is ever too much trouble. The products are excellent and I like being part of the research and development of their products to the ongoing benefit of the waterproofing industry. In addition I like the fact that my company is associated with the market leaders in structural waterproofing.” 

Ian MacLennan, MacLennan UK (Newton Specialist Basement Contractor)