Waterproofing Systems / System 500 / Newton Fibran XPS 500-C

              

Newton Fibran XPS 500-C

Closed-Cell Slotted Insulation Board

Newton Fibran XPS 500-C is a 50mm deep, closed-cell thermal insulation board made from rigid extruded polystyrene foam (XPS)


  • Key Benefits

    Newton Fibran XPS 500-C is a 50mm deep, closed-cell thermal insulation board made from rigid extruded polystyrene foam (XPS). The product is manufactured in accordance with EN 13164 – “Thermal insulation products for buildings – Factory made products of extruded polystyrene (XPS)-specification.”

    Produced exclusively for Newton Waterproofing Ltd, Newton Fibran XPS 500-C insulation boards are used to form a 50mm spacer adjacent to the Basedrain and Floordrain drainage channels within the Newton System 500 cavity drain waterproofing system. The insulation boards are rated at 500 kPa and feature specifically designed slots to the underside of the boards, that in combination with the perimeter and spine drainage channels of Newton System 500 form a fully drained supporting spacer below the floor drainage membrane.

    The insulation boards can also be used as a protection for Newton System 200 liquid applied waterproofing membranes applied externally to new earth retained structures or retained walls, uniquely offering protection, insulation and drainage within one product.

    Excellent thermal insulation characteristics with a very low coefficient of thermal conductivity

    Closed cell structure with no connecting capillaries resulting in extremely high resistance to water

    absorption and diffusion of water vapour

    Capable of permanent submersion in water

    Fully inert when subjected to climatic variations

    High mechanical and compressive strength and high dimensional stability

    Contains no CFC or HCFC’s

    Life expectancy is equivalent to the building in which it is installed (estimated 50 years)

    100% recyclable

    Easy to transport, cut and apply

    Completely rot proof and does not develop any mould or other efflorescence

    No nutritional value for rodents, insects, etc

    Good resistance to acids, alkalines, aggressive ground containments and inorganic gases

    Typical Applications

    As the spacer below Newton System 500 flooring membranes

    Protection of Newton System 200 liquid applied waterproofing membranes applied externally to retained walls

    Insulated support below Newton 403 HyrdroBond waterproofing membrane

    Parking decks and green roofs

    Full external envelope insulating of subterranean structures sited permanently within the water table

    Suitable Substrate

    Compacted, clean, and level surfaces

    Basement concrete floor slabs and rafts

    Earth retained walls of concrete, mortar or ICF

    Compacted blinding

  • Speak to the Experts

    For further information about structural waterproofing speak to one of our technical experts:

    Call us:  01732 360 095
    Email us: tech@newtonwaterproofing.co.uk

    ADD TO ENQUIRY


    PDF Downloads

    Data Sheet

    Declaration of Performance

    Material Safety Data Sheet


    Product Overview

    Code: 500C
    Size: 50mm x 1000mm x 600mm
    Colour: Green
    Area: 0.6m²


     

     


“I use Newton Waterproofing Systems because of the friendly and efficient service that we get - nothing is ever too much trouble. The products are excellent and I like being part of the research and development of their products to the ongoing benefit of the waterproofing industry. In addition I like the fact that my company is associated with the market leaders in structural waterproofing.” 

Ian MacLennan, MacLennan UK (Newton Specialist Basement Contractor)