01732 360 095

Newton 324-SR Injection Resin

A high performance, five-part injection resin that reacts to create an acrylic-rubber compound with exceptional durability, flexibility and adhesion. These qualities make Newton 324-SR perfect for sealing leaks in structures that are subject to settlement or movement, such as movement joints.

The cured resin also swells in contact with water, retaining that moisture so as not to dry or shrink even under seasonal temperature and water level fluctuations.

By adjusting the volume of Initiator (Part E) that is used, the reaction speed of Newton 324-SR can also be controlled from 18 seconds up to 18 minutes. Coupled with its flexibility, adhesion and low viscosity, the resin is guaranteed to penetrate deep into fine cracks in the substrate, even when dry.

  • Key Benefits
  • Typical Waterproofing Applications
  • Suitable Substrates
  • Newton ReSeal System
  • Key Benefits

    Key Benefits

    • Penetrates very deep into fine cracks.
    • Swells in contact with water and retains that moisture even at high temperatures.
    • Slow reaction times and very long working life.
    • Suitable for use within injection hose systems such as Newton 302 Injection Hose.

    Typical Waterproofing Applications

    Typical Waterproofing Applications

    • Deep sealing of wet or dry joints and fine cracks.
    • Stage 2 sealing to complete the water sealing operation after Stage 1 has been carried out by products such as Newton 320-FP.
    • Post-construction sealing of construction joints within reinforced concrete structures via the Newton 302 Injection Hose system.
    • Ground/curtain injection.

    Suitable Substrates

    Suitable Substrates

    • Concrete.
    • Masonry.
    • Steel.

    Newton ReSeal System

    Newton ReSeal System

    The Newton ReSeal System consists of a range of Newton’s advanced concrete repair mortars and injection resins to seal structural and non-structural cracks and defects, whether they are dry or leaking large volumes of water.

    The products in the Newton ReSeal System can be used to repair a number of defects, including spalled and broken concrete to walls and pillars, road repairs, and cracks and honeycombing to concrete basement walls, soffits and floors.

    Newton Resin Injection – Concrete Crack Injection from Lucinda Muschialli on Vimeo.

    Speak to our friendly, expert team

    Our staff are able to provide guidance for projects of all sizes, whether you require some general advice about damp or waterproofing, or support with technical drawings and specifications.

    By submitting your details you confirm that you agree to the storing and processing of your personal data by Newton Waterproofing as described in the privacy statement.