01732 360 095

Newton 108 HydroBond-LM

Highly radon resistant, cold spray-applied, seamless rubber waterproofing membrane for the external waterproofing of basements (including covered decks) and foundation walls.

Newton 108 HydroBond-LM is very quick to apply, at up to 1000m² per day, and is not subject to the delays normally associated with liquid membranes as it can be applied in cooler and damper conditions, and without a primer.

Newton 108 HydroBond-LM is extremely puncture resistant, with high elasticity and a 95% recovery memory. The membrane becomes fully engaged into the concrete surface to prevent water tracking and is suitable for all below ground and earth-retained structures, ranging from domestic basements to the largest civil engineering projects.

Newton 108 HydroBond-LM can be used together with Newton 403 HydroBond to provide a complete waterproof envelope to the structure, forming a Type A (barrier) waterproofing solution suitable for Grades 1, 2 and 3 as defined by BS 8102:2009. Where space is tight, Newton 109-LM can be applied by roller, brush or small airless spray machine.

The Newton HydroBond System is supported by BDA Certificate BAB 16-031/04/A and is accepted by the NHBC as a suitable waterproofing system for Type A Waterproofing to Grades 1, 2 & 3 – BS 8102:2009.

  • Key Benefits
  • Typical Applications
  • Suitable Substrate
  • Technical Data
  • Key Benefits

    Key Benefits

    • Cold applied fully-bonded seamless membrane.
    • Very elastic with no shrinkage.
    • No primer required.
    • Very quick to apply – up to 1000 m2 per day.
    • Cost efficient – The low price of the membrane coupled with high application rates = a very low installed rate per square metre.
    • Solvent free, non-toxic and odourless.
    • Non-flammable – No VOCs.
    • Chemically resistant.
    • Highly radon resistant.

    Typical Applications

    Typical Applications

    • Waterproofing of basement walls as part of Newton HydroBond System.
    • Standalone waterproofing membrane for basement, foundation and earth-retained walls.

    Suitable Substrate

    Suitable Substrate

    Correctly prepared substrates of:

    • Concrete of at least 20kN*.
    • Screed*.
    • Concrete block walls with flush pointing.
    • Insulated formwork walls (ICF).
    • Newton 908 LiquaBond screed.

    * Priming required to horizontal surfaces

    Technical Data

    Technical Data

     Cured Performance  Result
    Colour Black
    Membrane thickness – RC walls  1.0mm
    Membrane thickness – RC joints 2.0mm
    Membrane thickness – Radon barrier and Block & ICF walls  2.0mm
    Membrane thickness – Horizontal RC elements  3.0mm
    Density/Specific gravity (no reinforcement)  1.1
    Softening temperature  > 130ºC
    Adhesion to concrete  0.62N/mm²
    Tensile strength & elongation at break (reinforced) 0.68N/mm²
    Tensile strength & elongation at break (reinforced) (aged)  0.58N/mm²
    Loading capability (no reinforcement) – Class 1  0.06MN/mm2
    Resistance to static indentation (reinforced)  250N
    Crack bridging ability (no reinforcement) – Class CB2 ≥2mm
    Resistance to fatigue movement – 1000 actions @ -10ºC  Pass
    Dimensional stability at high temperature – no dripping  ≥70ºC
    Low temperature flexibility @ -10ºC  Pass
    Flexibility at low temperature @ 0ºC Pass
    Water vapour diffusion resistance – Sd value  72.4m
    Water tightness  7 bar
    Water resistance – 21 days at 21ºC  Watertight
    Impact resistance after UV-ageing – 1000h – 10 mm Pass
    Radon gas diffusion resistance (2 mm membrane)  2.4 x 10-11M²/s
    Reaction to fire classification  Euroclass B2

    Speak to our friendly, expert team

    Our staff are able to provide guidance for projects of all sizes, whether you require some general advice about damp or waterproofing, or support with technical drawings and specifications.

    By submitting your details you confirm that you agree to the storing and processing of your personal data by Newton Waterproofing as described in the privacy statement.