BBA certified, high quality damp proof membrane for use above ground as an alternative to 803 Newtonite or 805 Newlath where a meshed surface is not required as a surface for direct plastering or rendering - typically where the wall finish to the damp proof membrane is timber battens, a dry-lining frame or block wall.
Code: M19 & M20
Packaging: Roll: 1.0m x 10m (M19) & 2.0m x 20m (M20)
Application Rate: 10m² (M19) & 40m² (M20)
Isolation of wall finish from the damp wall
Does not require extensive and damaging preparation to the wall surface
Speed of installation
Resistant to efflorescing salts and hydrocarbon contamination
Shallow stud profile for where space is at a premium
As a damp-proof membrane to isolate the wall finish from the damp wall where a meshed surface for plaster or render is not required.
Newton 803 is available in rolls 1m x 10m = 10m2 (M19) and 2m x 20m = 40m2 (M20)
Newton 803 is typically used where the wall finish to the damp-proof membrane is timber battens, a dry-lining frame or block wall. Newton 803 is 0.5mm thick and has a pattern of raised 3mm studs. The studs face the wall and create air channels that allow for vapour equalisation to take place between the membrane and the wall.
Newton 803 is light, clean and easy to handle. It can be cut with a sharp knife, scissors or shears. The membrane is inert and is highly resistant to water, alkalies, saline solutions and organic acids, and it is not affected by minerals. It is also resistant to bacteria, fungi and other small organisms.
Newton 803 is guaranteed against deterioration for 30 years, and has a life expectancy of at least 50 years (DIN 9001:2000) and is supported by BBA Certification Number 94/3010.
Damp Proofing Shop
Newton 803 Damp Proof Membrane is available to buy online for next day delivery via our Damp Proofing Shop. You can buy the rolls of membrane individually or as part of our 7.5m2, 10m2, 15m2 and 40m2 damp proofing packs, which contain all the ancillaries you need.