01732 360 095

Stopaq Application Set

Single-component, highly flexible compound used for sealing conduits and pipes through service duct sleeves. An incredibly effective pipe sealant, the compound seals around numerous services within the sleeve, even where significant water ingress exists.

The unique pipe sealant compound never cures, remaining permanently flexible, allowing for new services to be simply pushed through the existing repair and resealed.

Stopaq 2100 Aquastop swells by up to 10% when in contact with water and will seal the service duct against water pressure of up to 3m, forming a very effective seal against gas and water vapour.

Stopaq 2100 Aquastop adheres to both wet and dry surfaces of concrete, mortar and plastic without the need of a primer. The swelling characteristics do not create any stresses to the service joint or the structure.

Once the service sleeve is sealed, Stopaq Mortar is used to cap the installation. The mortar is a fibre reinforced and non-shrinking product specially produced for use with Stopaq, that can receive new cables or conduits without the use of power tools.

  • Key Benefits
  • Typical Applications
  • Technical Data
  • Key Benefits

    Key Benefits

    • Fast and easy to apply.
    • The sealing remains permanently flexible.
    • Does not demand special tools for application.
    • No material waste – paste re-usable.
    • Immediate sealing: no curing time needed.
    • Provides permanent and optimal sealing of the service duct.
    • No fumes, no chemical reactions.
    • Adjusts to movements of pipes and cables.
    • Allows adding and removing of conduits at any time.

    Typical Applications

    Typical Applications

    • Wall inlets below ground water level – Stopaq 2100 Aquastop is suited for sealing against ground and surface water intrusion around pipes and cables, leading through building wall penetrations into basements and other earth retained structures.
    • Sealing of running water leaks – For permanent stopping of ground or surface water leaks through cable and pipe wall penetrations.
    • Wall penetrations inside buildings – Permanent sealing and protection of wall penetrations against gas or flooding is obtained with Stopaq 2100 Aquastop together with the Stopaq Mortar on either side of the wall.
    • Multi pipe & cable inlets – Stopaq 2100 Aquastop sealing compound is excellent for hermetic sealing of multipurpose, horizontal lead-through wall inlets, where several pipes and cables are coming through one opening.

    Technical Data

    Technical Data

    Features Result
    Material Synthetic Polyolefin Compound
    Colour Green
    Specific Gravity 1.2 to 1.5
    Pack size – Cartridge 0.4 Litres
    Pot life None
    Shelf life None
    Moisture Absorption (ASTM D570) 5 – 20%
    Gap filling 10 to 40mm
    Flash Point 170
    Installation Temperature 5ºC to 35ºC
    Service Temperature -20ºC to +35ºC

    Speak to our friendly, expert team

    Our staff are able to provide guidance for projects of all sizes, whether you require some general advice about damp or waterproofing, or support with technical drawings and specifications.

      By submitting your details you confirm that you agree to the storing and processing of your personal data by Newton Waterproofing as described in the privacy statement.