01732 496 523
Damp causes many problems in our properties, but there are usually three main causes of damp: rising damp, penetrating damp, and condensation. Identification of the type of damp is key. Once you are sure of the cause of the damp, there are often simple measures that might help the problem. It is worth spending the time looking over your property thoroughly to try and identify the causes as it may be something you can fix quickly. It is important to identify issues such as cracks in external walls, leaking gutters and other issues like poor ventilation.
Depending on the cause, remedial measures may be needed for treating damp and preventing further issues, ensuring your property stays warm and dry. Taking action early can also help reduce the cost of repairs and prevent further damage to the building’s structure. Professional assessment may be required for persistent or widespread issues.
Identifying the Cause of Damp
Common damp problems and possible causes include:
Rising Damp
- Lack of a damp proof course in old houses
- Failure of the damp proof course
- External ground levels that are higher than the damp proof course
Penetrating Damp
- Cracked masonry
- Poor pointing
- Defective rainwater goods, such as gutters or downpipes
- Penetration from driving rain
Condensation
- Poorly ventilated rooms
- Areas of high humidity e.g. bathrooms
- The appearance of mould on the walls
Newton Products for Treating Damp
Newton’s product range consists of BBA-certified damp proofing products. Newton products provide a comprehensive solution for treating damp.
Much like the best waterproofing solutions, the best damp proofing solutions use different products in combination. This helps to form the most comprehensive defence possible. Feel free to contact our technical department on 01732 360 095 or e-mail tech@newtonwaterproofing.co.uk. We will help to ascertain the cause of your damp problem and recommend the most suitable solution for your project.
The Newtonite Damp Proofing System contains a comprehensive range of products. We utilise these products in different combinations depending on the scenario. For example, Newton’s damp proofing membranes can be used together with a damp proof course (DPC). This is the perfect solution when the wait time for the wall to dry out is not practical. This system can also be used as an alternative to direct rendering with Newton 808-RA render. Newton also recognises that in some situations it will not always be possible, practical, or recommended to inject a new DPC. In this situation, a wall membrane will be the only solution.
Collectively, the products within the Newtonite System make it possible to deal with all forms of dampness. From rising damp to penetrating damp and residual hygroscopic damp to condensation, we provide the client with a fully BBA-certified solution.
Below-Ground Damp Problems
If your damp problems are in a basement or cellar area, a full waterproofing system is essential. Please see this article for more information about our basement waterproofing solutions: Basement Waterproofing: An Overview.
Damp Proofing Shop
You can buy many of Newton’s damp proofing products immediately. We offer next-day delivery via our Online Damp Proofing Shop. Our rolls of damp proofing membrane can be bought either individually or as part of our ready-made Damp Proofing Packs. Our ready-made packs contain all of the ancillaries that you will need and are available to cover areas of 7.5m², 10m², 15m² and 40m².
