01732 360 095

Ideally suited for the removal of ground water from basements and cellars as well as surface water collected within light-wells, patios and terraces. The TAS250 replaces the, CP250 and is sold in both manual and automatic versions. The TAS250 can be purchased as pump only, or within selected packaged pumping systems. The Newton TAS250 is suitable for use with Newton Victron Power Inverters to give continual pumping even during power outage.

The vertical operation float switch ensures that the pump operates within the pump footprint, removing the possibility of the float snagging during operation and allowing the pump to be used within smaller sumps. The vertical float switch of the TAS250 is also very adaptable, allowing the pump switching height to be adjusted both in terms of the height between the ‘on’ and ‘off’ positions, as well as the height of the switch relative to the pump.

  • Key Benefits
  • Typical Applications
  • Warranty
  • Key Benefits

    Key Benefits

    • Thermal overload protection against motor burnout
    • Non-clogging vortex impeller
    • Can pump down to just 15mm
    • Double mechanical seals ensure increased durability against particle abrasion and wear
    • Anti-airlock impellor housing ensures that the pump is able to remove trapped air even when the sump was previously dry
    • High performance and efficiency even with a low
      current
    • Unique vertical float allows complete adjustment of
      the start and stop heights
    • Continued pumping even during power cuts when
      used with Newton Victron Power Inverters

    Typical Applications

    Typical Applications

    Primarily designed to be used with Newton pumping systems for the removal of ground water collected by the Newton CDM Type C basement waterproofing system, Newton TAS250 is also suitable for:

    • Flooded basements and cellars
    • Light-wells
    • Surface water
    • Reservoirs and water holding vessels

    Warranty

    Warranty

    Newton TAS250 is supplied with a 1-year manufacturers warranty or a 3-year back-to-base warranty if serviced by a Newton approved service engineer.

    Speak to our friendly, expert team

    Our staff are able to provide guidance for projects of all sizes, whether you require some general advice about damp or waterproofing, or support with technical drawings and specifications.


      By submitting your details you confirm that you agree to the storing and processing of your personal data by Newton Waterproofing as described in the privacy statement.

      Bank Holiday - We will be closed on Monday 27th reopening on Tuesday 28th May