• PDF Downloads

    Data Sheet

    Declaration of Performance

    BIM Object

    View the BIM Object for Newton Condensation Strip M14

  • Product Overview
    • Membrane: 503

      Fixing Plug: Multiplug

      Jointing Tape: Newton Overtape

      Repairs: Newton Overtape

    • Membrane: 503 Mesh

      Fixing Plug: Multiplug

      Jointing Tape: Newton Mesh Tape

      Repairs: Newton Mesh Tape

    • Membrane: 508

      Fixing Plug: Multiplug

      Jointing Tape: Newton Waterseal Tape

      Repairs: Newton Overtape


    • Membrane: 508 Mesh

      Fixing Plug: Multiplug

      Jointing Tape: Newton Mesh Tape

      Repairs:  Newton Mesh Tape

    • Membrane: 520

      Fixing Plug: N/A

      Jointing Tape: Newton Waterseal Tape

      Repairs: Newton Overtape

    • Back-Box Liners

      Pre-formed to receive electrical pattress boxes, joists, beams and pipes. 

      Sealed to the membrane with Newton Waterseal Tape, Overtape or Mesh Tape 

                    

     

    Key Benefits

    The ancillaries comprise of a range of products that deal with fixing Newton System 500 to different substrates and surfaces, sealing the membranes, and dealing with protrusions and condensation.

    Typical Applications

    Newton MultiPlug (A1) - For securing Newton System 500 membranes to the wall and for providing a fixing point for 5mm screws and the Newton Helifix Wall Tie

    Newton NuSeal Plugs (A2, A3) – For fixing the membrane to vaulted ceilings and sloping soffits

    Newton Helifix Wall Ties (WT 155 to 325) – For fixing into the head of the Newton MultiPlug for the tying in of block or brick internal walls that are built in front of the Newton System 500

    Newton Insulation Fixing Plugs (IF90) – For fixing Newton Fibran XPS 500-C insulative spacer to the slab/raft where lightweight floor finishes are to be used

    Newton Waterseal Tape (A5, A5W) – Double-sided butyl sealing tape used to seal adjacent sheets of Newton membranes

    Newton Overtape (A7, A8, A9) – Single-sided butyl tape used to seal the Newton PAC Radon System and around protrusions at 3D detailing

    Newton Waterseal Rope (A6, A6w) – Butyl bead for sealing the base of the Newton NuSeal Plug for fixing to vaults and soffits

    Newton Mesh Tape (A25) – A meshed variant of Newton Overtape for Newton meshed membranes

    Newton Condensation Strip (M14) – For collecting condensation into the Basedrain and not on internal finishes

    Newton PipeCollar (A35) – Self-adhesive, preformed pipe seal for sealing a flat membrane to a protruding pipe

    Newton Pipe Sleeve (BX3) - Preformed waterproof sleeve for 110mm pipe

    Newton Joist Liner (BX4) - Waterproof lining for steels and joist ends, size: made to order