• PDF Downloads

    Data Sheet

    Declaration of Performance

    Safety Data Sheet

    Product Overview

    Code: 104
    Packaging: 25kg (Single Component)
    Colour: Grey
    Application Rate: 1kg/m²

    BIM Object

    View product on NBS National BIM Library

  • The active chemicals within Newton 104 combine with the free lime and moisture present within the capillaries to form insoluble crystalline complexes which effectively block the capillaries and any minor shrinkage cracks to prevent any further movement of moisture to provide a totally dry surface to the concrete.

    Large areas can be quickly treated with Newton 104. The speed of application and the low material application rate (1 kg/m2) makes Newton 104 a very low cost option for a large number of scenarios.

    Because Newton 104 penetrates deep into the concrete, it does not leave a physical membrane to the surface of the concrete element and so is completely unaffected by loadings imposed by further elements of the build. New concrete elements are placed ‘concrete to concrete’ with no potential for slip or separation as is the case with physical membranes. This makes Newton 104 particularly useful as a means of isolating moisture within pile caps, ring beams and kicker joints to internal walls.

    Key Benefits of Newton 104

    Ease of application – sprinkled on to new concrete and applied as a simple slurry to vertical and cured concrete.

    Permeates deep into the concrete to form a barrier against moisture that cannot be damaged or punctured.

    Loading capabilities only limited by the strength of the concrete.

    No physical membrane – subsequent concrete placement is ‘concrete to concrete’.

    Concrete treated with Newton 104 remains vapour permeable, allowing the structure to ‘breathe’.

    Easy to detail and specify as the concrete surface becomes the membrane.

    Very cost effective alternative to conventional physical membranes.

    Sealing of cracks up to 0.3mm resulting in dry concrete with less reinforceing steel requirement.

    Typical Applications

    Pile caps and ring beams 

    Support plinths

    Sealing of concrete surfaces

    Isolation of internal walls from moisture in the kicker joint

    Isolation of internal walls from moisture at the abutment with earth retained walls 

    Suitable Substrate

    Concrete with reinforcement to BS EN 1992 (Eurocode 2) with crack mitigation to 0.3mm